Make French Fries

The fries are delicious, especially for a nice plate of fries on a break. French fries are one of the most popular fast foods today, and French fries are one of the most popular. In fact, most of the french fries in fast food restaurants are frozen fries. So what are frozen fries? Quick-frozen French fries are made from potatoes, which are peeled, cut into strips, fried, deoiled, quick-frozen, and packaged. The finished product of the quick-frozen fries is half-cooked, and consumers can eat it after buying it back and deep-frying it. The advantages of quick-frozen french fries are that they are convenient, fast, easy to store, and efficient, reducing the hard work of cleaning, peeling, and cutting potatoes, and satisfying customers. So do you know how to make fries? Next, I will share with you two ways to make fries.

The First Method

Choose potatoes for fries, preferably fresh. Before frying the french fries, we pre-process the potatoes, wash and peel them and set aside.The following introduces the important steps of french fries. You can easily make delicious fries in just three steps.
1. Cut the french fries into uniform shapes. Do not cut them too finely. Potatoes that are cut too finely are easily broken when fried. Put the cut potatoes in water and add salt to soak them for ten minutes to 20 minutes. Compared with water, adding salt water is easier to remove the starch in the potatoes, make the potato strips more crispy.
2. Remove the soaked potato strips and put them in a bowl, add water to the pot, put the potato strips in after the water boils, and cook until they are five mature. Blanch the potato strips in water for one minute. Take it out and drain the water, put it in a fresh-keeping bag and then put it in the freezer layer of the refrigerator for about two hours. This step can increase the crispness of the potato strips.
3. Put an appropriate amount of cooking oil in the pot. When the oil is hot, you can put the potato strips in. You don't need to wait until the oil temperature is too high, otherwise the potato strips will be easily burnt. When the potato sticks are slightly yellow, turn up the heat and continue to fry them until they turn golden brown and take them out. At this time, the french fries are cooked.
The above is the first way to make french fries. There are a few points to pay attention to when frying french fries.
1. Selection of potatoes: potatoes in the shape of strips should be selected, the appearance is more uniform, and the cut potato strips are more beautiful.
2. A small amount of edible salt should be added when the potato strips are soaked, so that the starch in the potato strips can be soaked more cleanly.
3. When the potato strips are blanched, the water can be taken out for one minute. It is not easy to take too long. If the time is too long, the potato strips are easy to be cooked.
4. When frying the potato chips, put them in when the oil temperature is 50% hot, so that the potato chips can be fried from the inside to the outside, and the taste is more crispy.
French fries can be served with salad dressing or ketchup. The two kinds of sauces have different tastes, but they are both delicious. If you like to eat them, you can eat them directly.

The Second Method

Next is the second method, make french fries with a professional french fries production line.
One is automatic frozen french fries make line and the another one is semi-automatic frozen french fries make line.Before we understand the machines, let's figure out the process flow of the potato french fries make line. 
Step 1: Washing and Peeling. Put fresh potatoes in a potato washing and peeling machine.
Step 2: Cutting. Put it into potato cutting machine and cut potatoes into fries, the size can be adjusted from 7*7 to 12*12mm according to your needs.
Step 3: Blanching. Put the potato chips in the blancher. Through 60-95 degree hot water blanching to inhibit the activity of the enzyme and maintains the original vivid color of the fries.
Step 4: Dewatering. Put into a vibrating dewatering machine to remove excess water. This wewatering machine can adjust the dewatering time according to your needs.
Step 5: Continuous Frying. The continuous fryer allows the strips to be quickly fried in 180° oil for about 40 seconds to avoid sticking and extend shelf life.
Step 6: Deoiling. Use a deoiling machine to remove oil from the surface of the fries. Through high frequency vibrating to achieve deoiling purpose.
Step 7: Freezing. Using the freezering machine, through mechanical vibration and wind pressure, the fluidized quick freezer floats the product on the stainless steel mesh belt, freezes the product and prevents sticking to achieve IQF.
Step 8: Packaging and Storage. Put the french fries in the automatic weighing packing machine for packaging and storage. This machine can automatically fill nitrogen, automatically weigh automatically seal, and automatically pack.


The machine used above is the semi-automatic french fries production line developed by our company. This set of french fries production lines is a new type of french fries production line developed and developed by our company. This production line is made of high quality 304 Stainless Steel. PLC electrical control, safe and efficient. The production line adopts advanced technology, the output is high, and the ex-factory price is directly sold. This is the best choice for businesses and the most ideal device. Next, I will introduce the details of this french fries line to you.

1.Automatic french fries making machine

After that, let's take a look at the details and advantages of the automatic french fries production line. This set of production lines is a new type of french fries production line developed and developed by our company. This production line is made of high quality 304 Stainless Steel. PLC electrical control, safe and efficient.The production line adopts advanced technology, the output is high, and the ex-factory price is directly sold. This is the best choice for businesses and the most ideal device. 

Components of automatic french fries make machine

A fully automatic french fries machine contains: elevating, potato washing and peeling machine, picking machine, potato cutting machine, water tank elevator,fries sorting machine, bubble washing machine, blanching machine, vibration dewatering machine,air drying machine, elevating conveyor, continuous frying machine, vibration deoiling machine, pre-cooling machine, freezing machine and automatic weighing packing machine. The automatic potato chips and french fries production line is designed and developed by absorbing the essence of similar equipment, retaining the advantages of large-scale equipment for concentration, and referring to the feedback information of users all over the country. It has the characteristics of low one-time investment, low energy consumption, multiple functions, small size, high profit, and convenient use and maintenance. A complete set of equipment consists of cleaning and peeling, slicing (strips), blanching, dehydration, oil-water mixed frying, degreasing, seasoning, packaging and auxiliary equipment.

No.	Machine Name	Function	Advantage
1	Elevating	For elevating and conveying potatoes into the next washing peeling machine	1.The size can be customized 2.Conveying speed adjustable.
2	Potato Washing and Peeling Machine	Thoroughly washing and peeling the potatoes	1.  Washing and peeling capacity can be customized. 2. The length of brush can be customized. 3.We use high quality brusher,even old potatoes that are hard to peel can be peeled well. 4.Spraying system to clean the potatoes. 5.Spiral design to make sure automatic discharging. 6. The discharge speed can be adjusted. 7. The whole machine is made of 304 stainless steel.
3	Picking Line	For manually disposing the uncleaned places and selecting the defective potatoes	1.Picking table size can be customized 2.Conveying speed adjustable.
4	Potato Cutting Machine	Cutting the potatoes into fries,  sizes adjustable from 7*7 to 12*12mm	1.  The strips' size such as 7*7mm, 8*8mm, 10*10mm and custom made can be changed by adjusting the blade. 2.Cutting surface is smooth without damage. 3.The whole machine is made of 304 stainless steel, High speed stainless steel blades.
5	Water Tank Elevator	water as buffer to prevent fries breakage, and simply removing starch, meanwhile elevating fries into next step	1.Conveying speed adjustable. 2.The whole machine is made of 304 stainless steel.
6	Fries Sorting Machine	Automatically picking up the small pieces fries	1.Remove the unqualified fries. 2.The screening speed is fast and the quality of Potato fries is high.
7	Bubble Washing Machine	Through high pressure waterflow and water bubbles to impact and scrub the fries to wash off the starch	1.Remove the starch from the potato chips. 2.Strong water flow, bubble impact. 3.High pressure spraying system. 4.Filter system and water recycling system.
8	Blanching Machine	Through 60-95 degree hot water blanching to inhibit the activity of the enzyme and maintains the original vivid color of the fries	1.You can use gas, electricity or diesel as power for this machine depending on your needs. 2.It can effectively protect original vivid color of the potato strips/potato chip. 3.You can add additives during blanching process.
9	Vibration Dewatering Machine	Through vibration to remove the surface water and also to transport the fries uniformly to the next machine	The de-water time is adjustable.
10	Air Drying Machine	Through high pressure wind blowing for pre-cooling and removing the excess water in short time, effectively prevent the fried oil jumped phenomenon	1.The multi-layer mesh belt conveyor belt and special fan outlet completely remove the moisture on the surface of the potato fries. 2.Fan can be adjusted up and down.
11	Elevating Conveyor	For elevating and conveying the fries into next fryer machine	1.The size can be customized 2.Conveying speed adjustable.
12	Continuous Frying Machine	For quick frying the fries around 40 seconds in 180°oil to avoid the adhesion and extend the shelf life	1.Automatic lifting system, easy to clean. 2.Double mesh belt transmission to avoid the chips floating. 3.Oil filter and recycling system to automatically and continuously filter the oil residue to extend the service life. 4.Electric or gas heating.
13	Vibration Deoiling Machine	Through high frequency vibrating to achieve deoiling purpose, and also to convey the fries uniformly to next machine	The de-oil time is adjustable.
14	Pre-cooling Machine	Through high pressure wind blowing for pre-cooling and deoiling the fries	1.The multi-layer mesh belt conveyor belt and special fan outlet completely remove the oil on the surface of the potato fries. 2.Fan can be adjusted up and down.
15	Freezing Machine	Through mechanical vibration and wind pressure, the fluidized quick freezer floats products on stainless steel mesh belt, frozen products and prevent adhesion, achieve IQF	Customized according to customer needs
16	Automatic Weighing Packing Machine	For packing the finished frozen potato fries	It can fill Nitrogen automatically, automatic weighing, automatic sealing and automatic packing.

Automatic french fries make machine technical parameters

200-300kg French Fries Production Line
No.	Machine Name	Powder	Size	Price(Dollar)
1	Potato Washing and Peeling Machine	3.37kw	2300*700*1400	4300
2	Potato Cutting Machine	1.5kw	750*500*1100	1230
3	Blanching Machine	40kw	1200*700*950	3300
4	Dewater Machine	1.1kw	1000*500*700	1400
5	Frying Machine	40kw	1200*700*950	3300
6	Deoil Machine	1.1kw	1000*500*700	1400
7	Seasoning Machine	1.5kw	1000*800*1300	1880
8	Packing Machine	3kw	1300*700*1450	2600
Support customization according to customer requirements.				19210

2. Semi Automatic French Fries Production Line

Components of semi automatic french fries production line

A semi-automatic french fries machine contains: potato washing and peeling machine, potato cutting machine, blanching machine, dewater machine, frying machine, deoil machine, quick freezer and packing machine.

Semi automatic french fries production line technical parameters

200-300kg French Fries Production Line
No.	Machine Name	Powder	Size	Price(Dollar)
1	Potato Washing and Peeling Machine	3.37kw	2300*700*1400	4300
2	Potato Cutting Machine	1.5kw	750*500*1100	1230
3	Blanching Machine	40kw	1200*700*950	3300
4	Dewater Machine	1.1kw	1000*500*700	1400
5	Frying Machine	40kw	1200*700*950	3300
6	Deoil Machine	1.1kw	1000*500*700	1400
7	Seasoning Machine	1.5kw	1000*800*1300	1880
8	Packing Machine	3kw	1300*700*1450	2600
Support customization according to customer requirements.				19210

French fries make advantage

1.Processing flow can be customized: Different machines for making potato chips or frozen potato fries.Different machines for semi automatic or fully automatic processing.
2. Process capacity: Output capacity available from 30kg/h, 50kg/h, to 100kg/h, 300kg/h, to 1000kg/h, 2000kg/h
3. Material: All equipment are made of food grade SUS304 stainless steel.
4. Heating method: Electric, gas, or diesel heating source for blanching and frying machine.
5. The size of potato fries and the thickness of potato chips are adjustable
6. For potato fries line, we have special equipment to remove the unqualified fries.

Do you want to join the french fries business? If you are interested in the french fries production line or have questions about the french qfries make machine, please feel free to consult us.

French fries make video：