Ginseng dryer：Ginseng is placed in layers in the drying room, with sufficient spacing between layers, not too dense, to facilitate ventilation and dehumidification, and the air can be hot air circulation components to make the temperature and vapor flow in the entire drying room uniform. And take away the water molecules in time. When ginseng is dried...

Glutinous rice dryer：The drying temperature is best controlled at 35℃-50℃, and the time is about 10 hours. Ensure that the glutinous rice is white in color, smooth in hand, and high in recovery rate...

Cassava dryer：Push the material truck containing the cassava into the drying room, pay attention to the drying temperature of the cassava not to be set too high, it can be divided into multiple zones, and the drying time can be increased at a constant speed. 2 hours before the equipment is running, it can be set to dry only Dry without dehumidification...

Fungus dryer：After placing the fungus layer by layer evenly on the tray, put it in a stainless steel material truck and push it into the drying room. The temperature of the fungus drying should start from 35°C. If the temperature is too high, the moisture removal will not keep up, which will easily cause the fungus to deform...

Jasmine dryer：The integrated solution of jasmine drying, essential oil extraction and floral dew recovery. First, jasmine flowers are dried naturally at a temperature of 30°C-37°C. Under natural conditions and normal temperatures (32°C-37°C), the jasmine spit lasts for up to 24 hours. From observation and testing, it can be seen that within 5 hours is a period of vigorous spitting...

Rice noodle dryer：Use a heat pump dryer to remove the surface moisture of the rice noodles as much as possible in this stage, and gradually increase the temperature of the rice noodles to make the temperature inside and outside the rice noodles consistent. The temperature in this interval is generally set at about 25℃...

Maca dryer：During the baking process, it is necessary to master the three processes of temperature from low temperature to high temperature + cooling.When entering the furnace in the first stage, because the water content is still high, the temperature is gradually increased and maintained for 12-15 hours to gradually evaporate the water...

Ganoderma lucidum dryer：Set the temperature of the heat pump dryer to medium-high temperature dehydration and drying for 2-3 hours, and then dehydration and drying at a temperature of 60°C-70°C for 8-12 hours. The entire drying process of Ganoderma lucidum should be completed at one time to avoid interruptions...

Lotus dryer：When the ambient humidity is 28°C, the temperature is controlled at 50°C at the beginning of the drying, and the humidity in the drying room is controlled at 30%. Generally, drying can be completed in 6 hours...

Chitosan dryer：The drying process requires a circulating air path. Because the side-outlet system basically has no dead corners, but the most demanding of such products is higher. You can use stainless steel riveting such as arc-shaped corners at the corners of the wind road to increase the wind speed...

Platycodon grandiflorum dryer：Clean selection Put the raw materials of Platycodon grandiflorum on the clean selection workbench, and pick out the impurities.Throw the cleaned Platycodon grandiflorum into the rinse, wash, and then put it in the bath for a little soak, remove it and moisten it thoroughly...

Enoki mushroom dryer：The moisture content of fresh Enoki Mushroom is about 90%, and the moisture content required for drying is 13%. The entire drying process is about 8 hours, requiring a temperature of about 50°C-65°C (adjustable), uniform temperature and humidity, and uniform air flow...