Introduction to tremella：

  Tremella, also known as white fungus, white fungus, white fungus, etc., belongs to the genus Tremella of the fungus family Tremella. It is the fruiting body of the phylum Basidiomycota fungus and has the reputation of "the crown of fungus".
  Most species of white fungus are born on the logs of various trees. But Tremella mycelium has almost no ability to decompose cellulose, so it must rely on the assistance of another fungus in the process of completing its life history. The cellulose, lignin, starch, etc. that cannot be used by silk are decomposed into nutrients that can be absorbed by the tremella hyphae.

Tremella drying process：

1. Tremella harvested and dried in advance
After the white fungus is harvested, it can be pre-suned and then dried in sunny weather. The vitamin content of the dried white fungus is not easy to lose. You can also start the heat pump dryer to preheat to about 42°C, directly clean, select and drain. The white fungus after moisture is evenly loaded into the stainless steel tray and pushed into the drying room.
2. Initial temperature setting of Tremella
Freshly harvested fresh white fungus has a water content of more than 80%, and it takes about 3 days to dry, which slows down production. The heat pump dryer can be used in about 15 hours. The initial drying temperature should be low, starting at 30°C, the drying time is about 5 hours, and the moisture content of the ear flaps drops to about 30%.
3. Mid-stage temperature of Tremella drying
Mid-term drying of white fungus raises the temperature to about 55°C, and the drying time is 5-8 hours. The temperature in the early and last period of drying should be low, and the temperature in the mid-term should be high. The quality of drying.
4. Late drying stage of Tremella
In the late stage of the Tremella drying stage, the ear flaps are almost dry, and the temperature in the dryer is reduced to about 35°C. When the ear base is completely dry, the whole drying process is completed. After the white fungus is dried, when the cooling is consistent with the normal temperature, the white fungus can be packaged and stored in grades.

Recommendation of tremella dryer/drying machine

Commercial 100-3000kg/h large amount of dehydration wide application and easy operation

  Heat pump drying machine use the principle of inverse Carnot cycle. It absorbs low-temperature heat energy in the air, which becomes high-temperature heat energy after efficient heat collection and integration by the heat pump system, and is transported to the drying room for cyclic heating and drying of materials.It refers to exhausting the hot and humid air in the drying room directly to the outside of the drying room through dehumidification device, and then replenishing natural fresh air.

  Hot air circle drying machine belongs to high temperature heat pump unit. Its working principle is: the working fluid of the heat pump is compressed by the compressor, becomes high temperature and high pressure gas, enters the condenser, condenses and liquefies the heat, and is used for air heating in the drying room. The moisture in the material is vaporized and evaporated by the form of hot air, and the evaporated water vapor is discharged by the moisture discharge system, thereby achieving the purpose of drying the drying material.


Tremella drying video：