Commercial Fish Drying Machine

The processing of fish is inseparable from the drying process. Drying the fish can effectively prolong the shelf life and increase the flavor of the fish. Therefore, the processed fish has a huge market. Commercial drying of fish using traditional sun drying methods may result in contamination of the fish, and requires significant labor costs. Most fish processors use commercial fish drying mahcines to reduce drying time and drying costs. Then if you want to buy a commercial fish drying machine, you must know the details of commercial fish drying machine. Next, Baixin Company, which has more than ten years of fish drying experience, will share with you several commercial fish drying machine.

1. All-in-one fish drying machine

The one is the all-in-one fish drying machine. The drying principle is the same as that of the fish drying room. The all-in-one fish drying machine is equipped with a cart with trays and tray racks. When drying fishs, we put them in trays, put them on the tray racks of the cart, and then push them into the fish drying chamber for drying.
The heat source of the fish all-in-one drying machine is air energy. The heat in the air is absorbed by the heat pump compressor. After compression and release, a large amount of high-temperature hot air can be obtained, so as to achieve continuous and uniform drying and processing of fishs. The operation of this all-in-one drying unit is relatively simple, simply plug in and dry.

Components of all-in-one fish drying machine

One set all-in-one fish drying machine contains: power jack, water outlet,exhaust air outlet, supporting wheels, PLC controller pancl, door lock, observation window,circulating air inlet, outlet for hot and dry air, PP tray, stainless steel tray, supporting racks for trys. The fish all-in-one machine has compact structure, good energy-saving effect, wide application range, high drying quality, convenient operation, simple installation and disassembly. It is the best drying equipment for small businesses, drying experiments and scientific research. The user only needs to connect the power to use, it is the easiest to operate fish drying machine.

Technical parameters of fish all-in-one drying machine

All-in-one heat pump dryer list
type	machine size(MM)	Capacity (KG)	power	total power（kw）	Qty of cart	Qty of tray	cart size(MM)	tray size(MM)
1P	1180×680×1800	50-80	1	1	—	15	—	600×800
3P	2100×930×2100	120-300	3.5	3.5	—	40/60	—	600×800
8P	4000×1960×2050	650-1000	8	8	8	232	600×800	600×800
The drying machine can be equipped according to the user's requirement and the production demands.

Advantages of all-in-one fish drying machine

1. Stainless steel 304 material. The whole machine uses stainless steel material, can work a long time, and keep better heat preservation, bottom have wheeler, can move easily.
2. Great energy saving. Heat pump system design, low energy consumption, can save 75% energy than traditional electricity element heating.
3. Wide application easy operation. Fit for wide application, seafood, fruit, food, spice, herbs, etc all can use it to dry.
4. Gentle drying. Temperature range 40-80°C, low temperature dehydrate processing can better keep material nutrition, during drying, no need to move the machine.

2. Fish drying room

The another type of drying machine is the fish drying room. The fish drying room is equipped with a trolley with trays and tray racks. When we dry the fishs, we put the fishs in the tray, on the tray rack of the cart, and push it into the fish drying chamber to dry. Fishs are putted on the shelf car and enter the closed cycle drying room for drying without any pollution in the process. The heat source of the fish drying room is air. The heat in the air is absorbed by the heat pump compressor. After being compressed and released, a large amount of high-temperature hot air can be obtained, so as to achieve uniform drying and processing of fishs.

Components of fish drying room

One set fish drying room contains: heat pump drying host, dryer chamber, fan frame with fan, trolley with tray. The dryer chamber is used 100mm polyurethane insulation board, supporting 304 stainless steel trolleys and trays. The main structure of the fish drying room is divided into: heat pump drying dehumidifier, drying room, hot air circulation system, dehumidification system, automatic intelligent control system, and high-efficiency waste heat recovery dehumidification device. The air energy heat pump bacon dryer is efficient and stable, with strong temperature controllability, greatly improving drying efficiency and drying process, safe and reliable operation of the unit and long service life. The corresponding heat pump unit can be matched arbitrarily according to the drying volume of the customer, and it can be customized according to the needs.

The working principle of fish drying room

The fish heat pump drying machine uses the reverse Carnot principle to let the hot air circulating blower dry the vegatable. Heat Pump Dryer Compressor Heat Exchanger Blocked Radiator (External to Machine). Compressor and other equipment make up the refrigerant circulation system. The fan impeller rotates, the outside air enters the oven, passes through the heater, forms hot air, and then enters the studio through the gap of the air distribution plate, and a large amount of hot air in the circulating flow continues to enter the new air inlet for supplementation. The moisture discharged after recovery is discharged from the exhaust port. The whole cycle makes the vegatable heated evenly and achieves the purpose of drying.

Technical parameters of fish drying room

heat pump dryer list
type	machine size(MM)	Capacity (KG)	power	Qty of fan	fan power	total power（kw）	Qty of cart	Qty of tray	cart size(MM)	tray size(MM)
3P A	3500×2200×2200	200-400	2.25	6	0.25/pc	3.75	6	78	670×810	600×800
8P A	5300×2200×2800	450-750	6	12	0.37/pc	10.44	6	156	1210×870	600×800
15P	7500×3000×2800	900-1500	11.25	12	0.55/pc	17.85	12	312	1210×870	600×800
1P D	1180×680×1800	50-80	1	—	—	1	—	15	—	600×800
3P D	2100×930×2100	120-300	3.5	—	—	3.5	—	40/60	—	600×800
8P D	4000×1960×2050	650-1000	8	—	—	8	8	232	600×800	600×800
The drying machine can be equipped according to the user's requirement and the production demands.

Advantages of fish drying room

1 Wide application. Suitable for fish, fruit, seafood, spice etc different kinds of material.
2 High drying capacity. Each hour can drying 3-4kg water.
3 Better drying effect. Can better keep material shape , color , nutrition etc.
4 Simple operating. PLC touch screen control panel , can set up temperature, humidity in advance  
5 Low energy consumption. Heat pump system, can save 70% energy.
Other application areas of fish drying room
Heat pumps dryer can be used in many applications, in addition to drying fishs can also be used in agriculture, industry, seafood, grain, herbal medicine, construction, paper products, condiments, mineral industry, etc.
1. Dried fishs such as radish, lettuce, pumpkin, carrot, spinach, cassava, etc.
2. Fruits such as apples, lemons, mango slices, dried longan, dried longan, etc.
3. Dried fish such as sausage, beef, duck, ham, etc.
4. Others it can dry noodles/wooden/incense/herbs/floss etc.
How to choose a suitable commercial fish drying machine?
In terms of output, The output of the fish drying room machine is 100-5000/batch. The output of the all-in-one fish drying machine is the smallest, and its output is 100-1500/batch. It is suitable for agricultural plants or small processing plants. Oven length and mesh belt layers can be customized. We can choose and match them reasonably according to our own processing requirements.

The above are the two commercial fish drying machines we commonly use. At the same time, our company also produces commercial mesh belt fish drying machines and microwave fish drying machines. If you are interested in commercial fish drying machines or want to know more about commercial fish drying machines, please feel free to contact us.

Commercial fish drying machine video：